How to Connect WIFI Register and Activate Launch X431 Diagun IV?

2017 New X431 diagun iv, can replace X431 Diagun III or X431 IV can support update online via wifi.And diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.And today we will introduce about some using tips about Launch X431 Diagun IV for WIFI connection,register,activate.

1.How to Connect/Disconnect Diagun IV WiFi?

Wi-Fi Setting Note: If you don’t need to use Wi-Fi for a while, you can turn it off to conserve battery life.

X-431 Diagun IV has built-in Wi-Fi that can be used to get online. Once you’re online, you can register your X-431 Diagun IV, surf the Internet, get apps, send email, launch the remote diagnosis, and check for software updates etc.

Connect to a Wi-Fi network

1.1.On the home screen, tap Settings -> WLAN.

1.2.Slide the Wi-Fi switch to ON, X-431 Diagun IV will start searching for available wireless networks.

1.3.Select a wireless network, y If the chosen network is open, X-431 Diagun IV will connect automatically; y If the selected network is encrypted, a network password will need to be entered.

1.4. When “Connected” appears, it indicates the Wi-Fi connection is complete.

Note: When Wi-Fi is not required, this should be disabled to conserve battery power. Once it is connected successfully, tap the Wi-Fi network from the list to view its name, link speed, security type, IP address etc. When this tool is in range, it will connect to the previously linked network automatically.

Disconnect from a Wi-Fi network

On the home screen, tap Settings -> WLAN.
Tap the network with a Connected status, then tap “Disconnect”.

2.How to register and activate Launch X431 Diagun IV?

Tap “Login” on the upper right corner of the main menu screen:

If you are a new user, tap “New Registration”. Note: To obtain better service, you need to provide real information.

A. Create App account: fill in the information in each field and then tap “Register”.

B. Activate the VCI connector: input the Serial Number and Activation Code, which can be found in the password envelope.

Note: To exit and activate it later, tap “Skip”. In this case, you can activate your connector by tapping “Activate Connector” in “Personal Center”.