Launch Creader 619 and Creader 419 Comparsion

Launch DIY Scanner CReader 419 and Launch Creader 619 is an entry-level personal car maintenance tool.Launch Creader 619 scanner can support ABS and SRS system diagnostic functions.Here is brief comparison about Launch Creader 619 and Creader 419.

1.Launch Creader 619 and Creader 419 Comparsion

2.How to update the software of CR619?

1. Go to the official website of LAUNCH “www.dbscar.com”, click “Products” ->”creader 4001~9081″; find the “creader 6001”, then down load the update tool to your computer.
2. Install the update tool on your computer
3. Connect the Creader 619 to your computer via the USB data line in the package.
4. Run the update tool software, fill in the serial number and register code of creader 619 (The serial number and register code will be found on the screen when you conect creader 619
to your PC), click the update. Please keep the device connected and ensure the network works well.

How to Register/Update Launch CReader 419 DIY Scanner?

The tool can be updated via USB cable.
Note: make sure the PC has an Internet connection.
1. Go to www.dbscar.com and download the update tool to the computer.
2. Decompress and install it on your computer (compatible with Windows XP, Windows7, Windows8 & Windows10)
3. After installation, connect one end of the USB cable to the USB port of PC, and the other end to the tool.
4. If a newer version is found, a screen similar to Fig A will appear.
5.  Launch the update tool on your PC, [Device upgrade] box will appear.
6. Choose the desired interface language and then click [Device Update] to enter update center.
7. Choose the software version and then click [Update] to start updating.
8. Once update is complete, a ‘Upgrade success’ message box will pop up. Your tool is now ready for use.