VXDIAG VCX Nano GM Kit support both GDS & GDS2. GDS 2 works similar to the original GDS. Easier and faster.VXDIAG Software Version:GDS2 2016.1.0 TECH2WIN 33.003.Here is the VXDIAG GM feedback about 2010 Buick Excel car model.
Easy to install gds2 in Win7 64bit, 3 steps only— install VMware, set COM Port & install VXDIAG GM Driver.
For the detail, go on reading…
–Step 1 Install VMware
Open GDS2 software CD
Open “VMware-player-6.0.6-2700073” and install VMware-player
Install wizard for VMware Player
Accept license agreement
Tick “Check for product updates on startup”, click Next
Click Next, Create desktop shortcuts, click Next
Setup Wizard complete, press Finish
Copy GDS2 VM folder on CD to Local Disk (E;)
Open VMware Player on desktop
Open a Virtual Machine->select E:/GDS2 VM->Win_XP_GDS2_11_2014
Select Play virtual machine
Press “I copied it” if the system asks have you moved or copied the virtual machine
–Step 2 Set COM Port
Make a full screen of VMware
Open Computer->Manager->Device Manager->Ports&LPT to check device is well connected to the computer
Click VMware, back to host machine, disconnect VCX Wifi connection
Open virtual machine again, go to Computer->Manager->Device Manager->Ports&LPT to check USB Serial Port is set to COM3
–Step 3 Install VXDIAG GM Driver
Open VX Manger driver on desktop
Select “Configure” button
Select Connection Type as “USB”
Then i go to basically diagnose my car.
I successfully read & clear trouble codes of airbag, ECM, etc.
Also, i read VIN, ECU part numbers and software numbers.
Record, store and replay stored data…it’s ok.
Sbc reset i did so.
But control and monitor output control functions and freeze frame data function…i haven’t tried. And record or display history of the previous vehicle diagnostic sessions… should no much trouble, i think
Here, take one diagnosis as an example, ECM codes reading.
connect VXDIAG interface to EXCEL via the cable, to laptop via wireless connection.
Connect VCX WIFI wireless connection
Open VX Manager on desktop
Press “Configure” function
Set Connection Type to “WLAN” and save it
Open GDS2 software on desktop and diagnose 2010 Buick Exce
Module Diagnostics, click Enter
Engine Control Module, click Enter
Engine identifier: select 1.6L (LDE) and click Enter
Diagnostic Trouble Codes (DTCs) and click Enter
DTC display, click Enter